DIN 51363-3-2008 石油产品的测试.润滑油和添加剂磷含量的测定.第3部分:使用感应耦合等离子体的光学发射光谱分析进行直接测定(ICPOES)

作者:标准资料网 时间:2024-05-21 03:02:15   浏览:8104   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:Testingofpetroleumproducts-Determinationofphosphoruscontentoflubricatingoilsandadditives-Part3:Directdeterminationbyopticalemissionspectralanalysiswithinductivelycoupledplasma(ICPOES)
【原文标准名称】:石油产品的测试.润滑油和添加剂磷含量的测定.第3部分:使用感应耦合等离子体的光学发射光谱分析进行直接测定(ICPOES)
【标准号】:DIN51363-3-2008
【标准状态】:现行
【国别】:德国
【发布日期】:2008-08
【实施或试行日期】:
【发布单位】:德国标准化学会(DE-DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:活性物质;添加剂;化学分析和测试;化学试剂;含量测定;发射光谱分析;仪器;实验室器皿;润滑油;材料测试;矿物油;光学测量;反射镜;石油产品;磷;磷含量;试剂溶液;试样制备;分光计;试验报告;试验溶液;测试;X射线荧光光谱法
【英文主题词】:Activesubstances;Additives;Chemicalanalysisandtesting;Chemicals;Determinationofcontent;Emissionspectralanalysis;Instruments;Laboratoryware;Lubricatingoils;Materialstesting;Mineraloils;Opticalmeasurement;Petroleumproducts;Phosphorus;Phosphoruscontent;Reagentsolutions;Specimenpreparation;Spectrometers;Testreports;Testsolutions;Testing;X-rayfluorescencespectrometry
【摘要】:
【中国标准分类号】:E34
【国际标准分类号】:75_100
【页数】:9P.;A4
【正文语种】:德语


下载地址: 点击此处下载
【英文标准名称】:Rollingbearings-Plummerblockhousings-Boundarydimensions.
【原文标准名称】:滚动轴承.止推轴承座.外形尺寸规格
【标准号】:NFE22-309-2011
【标准状态】:现行
【国别】:法国
【发布日期】:2011-03-01
【实施或试行日期】:2011-03-16
【发布单位】:法国标准化协会(FR-AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:轴承;连接尺寸;定义(术语);尺寸规格;外壳;外形尺寸;轴台;止推轴承;滚动轴承附件;滚动轴承
【英文主题词】:Bearings;Connectingdimensions;Definitions;Dimensions;Enclosures;Overalldimensions;Plummerblock;Plummer-blockbearings;Rollingbearingaccessories;Rollingbearings
【摘要】:
【中国标准分类号】:J11
【国际标准分类号】:21_100_20
【页数】:11P;A4
【正文语种】:其他


Product Code:SAE AMS4325
Title:Aluminum Alloy, Extruded Wide Panel Profiles (7150-T77511), 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr, Solution Heat Treated, Stress-Relieved, Straightened and Overaged
Issuing Committee:Ams D Nonferrous Alloys Committee
Scope:This specification covers an aluminum alloy in the form of extruded wide panel profiles (shapes) and rod and bars produced with cross sectional area of 14 to 30 square inches (90 to 194 square cm) from circumscribing circle diameters (See 8.3) of 14 to 22 inches (356 to 559 mm).